日本无码中出在钱,欧美一级成人网站,黄色毛片免费看片,五区六区久久久久,日韩美女永久网址在线观看

冷軋鋼板由于有一定程度的加工硬化，韌性低，但能達到較好的屈強比，用來冷彎彈簧片等零件，同時由于屈服點較靠近抗拉強度，所以使用過程中對危險沒有預見性，在載荷超過許用載荷時容易發生事故。

Due to work hardening of cold rolled steel plate, a certain degree of toughness is low, but can yield better than that used to cold spring piece parts, at the same time as the yield point is close to the tensile strength, so the use of risk is not predictable, prone to accidents in the load exceeds the allowable load.

1) 冷板采用冷扎加工表面無氧化皮，質量好。熱軋鋼板采用熱扎加工表面有氧化皮，板厚有下差。

1) cold plate used in cold rolling surface nonscale, good quality. The hot surface oxide thickness of hot rolled steel, have difference.

2)熱軋鋼板韌性和表面平整性差，價格較低，而冷軋板的伸展性好，有韌性，但是價格較貴。

2 hot rolled steel plate toughness and surface roughness is poor, the price is low, while the cold rolled plate of good ductility, toughness, but the price is more expensive.

3)軋制分為冷軋和熱軋鋼板，以再結晶溫度為區分點。

3) divided into cold and hot rolled steel plate, the recrystallization temperature is provided.

4) 冷軋：冷軋一般用于生產帶材，其軋速較高。

4) cold rolling: cold rolling is generally used in the production of strip, the high speed.

熱軋鋼板：熱軋的溫度與鍛造的溫度

Hot rolled steel plate: hot rolling temperature and forging temperature

5)不電鍍的熱扎鋼板表面成黑褐色，不電鍍的冷扎板表面是灰色，電鍍后可從表面的光滑程度來區分，冷扎板的光滑度高于熱扎鋼板。

5) hot plate surface plating black brown, plating cold rolled plate surface is gray, after plating from the surface smoothness to distinguish, lengzha board smoothness is higher than that of hot rolled steel plate.

本文的精彩內容來自: 濟鋼一級代理商更多的詳細內容請點擊我們的官方網站： http://www.ctmpfsc.com謝謝您的到來

Wonderful content of this article from: Jinan an agent for more details please click on our official website: http://www.ctmpfsc.com thank you for coming