地址：濟南市高新區漢峪金谷A5-2棟
電話：15066665432
傳真：0531-88984022
聯系人：殷經理
郵箱：jnyygt@126.com
網址：www.ctmpfsc.com
①低溫壓力容器受壓元件應選用鎮靜鋼。
The low temperature pressure vessel compression element should choose the calm steel.
②低溫壓力容器受壓元件一般要求正火處理，目的細化晶粒，均勻顯微組織，降低鋼材無塑性轉變溫度。
The low temperature pressure vessel element general requirements for normalizing treatment to grain refinement and uniform microstructure, reducing the steel nil ductility transition temperature.
③必須做設計溫度下低溫沖擊試驗（V）。
Temperature impact test (V) must be done at design temperature.
④鋼板δ>20mm，應逐塊超聲波檢測。
The steel plate should be piecewise >20mm, ultrasonic detection.
⑤設計溫度在-70到-100區間，目前國內尚無合適材料，可選用奧氏體不銹鋼。-100~ -196℃，應選用奧 氏體不銹鋼。
The design of temperature in the -70 to -100 range, at present there is no suitable material, can be used for austenitic stainless steel. -196 -100~ C, should be used austenitic stainless steel.
⑥根據《容規》三類容器的主要受壓元件應進行材料復檢驗。
According to the main pressure elements "content regulation" three containers should be material inspection.
本文由濟鋼一級代理商提供幫助，更多的相關內容請點擊：http://www.ctmpfsc.com我們將詳情為您解答.歡迎您的光臨!
This paper provided by Jinan level agents help, more relevant content: http://www.ctmpfsc.com please click Details to answer your questions. We will welcome you!